求助:P6V7.0WEB与ProgressReporter服务同时启动 [复制链接]

求助各位大虾:WEB和ProgressReporter组件均使用jboss在同一台服务器上同时启动。 H(""So7L  
安装和配置完成后该两组件都可以单独启动正常运行，修改了ProgressReporter服务上server.xml文件中端口号，还是不能同时启动。请问大家该做法是否正确？并求能够解决的方法？先谢谢了!

http://primavera.zxlm.cn/kb/prim84189 /1g_Uv;  
rFdovfb   
Problem: How To: Resolve JBoss port conflicts when P6 v7 Web and Contract Management 13 are installed on the same server running on JBoss 5.0.1. P b2exS(  
Problem: When both Contract Management 13 and P6 v7 JBoss web servers are installed on the same machine, receive error: “Page cannot be displayed”.  sy#CR4X  
Problem: Port Conflicts when Running P6 v7 Web Application (JBoss) and Contract Management (JBoss) from the same machine <+pwGKtD  
Cause: By default, both the P6 v7 Web and Contract Manager servers will attempt to use the same ports. If one web server is already started, the other web server will fail because the ports it is attempting to use are already in use. hcwKi  
Fix: To resolve the port conflict, the default configuration of one of the web servers will need to be changed. fY$M**/,  
Bo_Ivhe[m  
vt@.fT#e  
i5q VQo  
Both web servers have port configuration information stored within files called bindings.xml and server.xml. M-"%4^8_  
9SXFiZA(r  
mKQ!@$*  
U,~\}$<I  
Stop both the Contract Management and the P6 v7 Web Application Services. PiP\T.XANa  
tJ i#bg%  
[
n44;  
ab: yH ')  
Locate the bindings.xml file to be changed. uL\ B[<:  
5_x8 !v  
NOTE: Changing either server is acceptable. ?ep93:j  
(Xi?Y/  
Default file location for Contract Management: <Install Drive>\jboss-5.0.1.GA\server\cm\conf\bootstrap\bindings.xml ,dLh`t<\  
Default file location for P6 v7 Web Access: <Install Drive>\jboss-5.0.1.GA\server\primaveraweb\conf\bootstrap\bindings.xml -uHD| }  
|^[]Oy=  
)xy1DA  
`<cB 6  
Ensure the file is not read-only, open with Notepad. FO&U{(Q  
ba^B$$?Bo  
NiQ`,Q$B  
B\G?dmo  
Change the port numbers for the following eight areas: */;[ -9  
uQ=p }w  
ELZCrh6*  
Remote classloading service 01uMbtM  
CkKr@.dV  
Change port 8083 to an available port. ^mz&L|h  
]3uErnI  
For Example: F[BJhN*]a  
'/trM%<  
<!– Remote classloading service –> @KfFtR-;  
<bean class=”org.jboss.services.binding.ServiceBindingMetadata”> ViIt'WX  
<property name=”serviceName”>jboss:service=WebService</property> rJ|Q%utYz  
<property name=”port”>8084</property> $w4%JBZr  
</bean> A[`c2v-hF  
#Mkwd5S|L  
|WqEJ *$,  
RMI/JRMP invoker azF|L"-RP  
2
#:/C:  
Change port 4444 to an available port. &7"a.&*9xX  
q <Gn@xc'  
For Example: &'4{/Gz  
HI)MBrj;r  
<!– RMI/JRMP invoker –> -e0C Bp  
<bean class=”org.jboss.services.binding.ServiceBindingMetadata”> x(pq!+~K  
<property name=”serviceName”>jboss:service=invoker,type=jrmp</property> g S xK9P  
<property name=”port”>4454</property> B7BXS*_b  
</bean> S81Z\=eK  
#2l6'gWE0  
V;0{o  
Pooled invoker |TM&:4D]^  
ii&{gC  
Change port 4445 to an available port. jR-DH]@y  
t9T3e  
For Example:
Q M7z .  
G%0G$3W"  
<!– Pooled invoker –> Dlz||==  
<bean class=”org.jboss.services.binding.ServiceBindingMetadata”> mw0#Dhyy1=  
<property name=”serviceName”>jboss:service=invoker,type=pooled</property> i\hH .7G1  
<property name=”port”>4455</property> ~3-2Iu^F  
</bean> Cx$C+  
Zkl:^!*  
;m6Mm`[i
<  
Naming Service 3?|gBi
X  
$[9, 1.?C  
Change ports 1098 and 1099 to available ports. dv3+x\`9  

k#"Pv"  
For Example: Cr0 \7  
VesW7m*z  
<!– Naming Service –>  FkJa+ZA  
<bean class=”org.jboss.services.binding.ServiceBindingMetadata”> N}{CL(xi  
<property name=”serviceName”>jboss:service=Naming</property> 47I5 Y5  
<property name=”bindingName”>Port</property> G"!YV# "~  
<property name=”port”>10990</property> f:
iK5g
 
</bean> W}B4^l
 
), `MAevp  
<bean class=”org.jboss.services.binding.ServiceBindingMetadata”> i(.c<e{v~  
<property name=”serviceName”>jboss:service=Naming</property> /Z<"6g?  
<property name=”bindingName”>RmiPort</property> BcV;EEi  
<property name=”port”>10980</property> x)<5f|j  
</bean> y$@d%U*rW^  
]RHR>=;  
A(AyLxB47*  
deploy/jmx-remoting.sar 0@a6r=`el  
;aYPv8s~,:  
Change port 1090 to an available port. -F,o@5W>Y  
 N3^pFy`  
For Example: jeb<qi>  
%Fb"&F^7  
<!– ********************* deploy/jmx-remoting.sar **************** –>
M64zVxsd  
qS{lay  
<bean class=”org.jboss.services.binding.ServiceBindingMetadata”> #I9|>XE1  
<property name=”serviceName”>jboss.remoting:service=JMXConnectorServer,protocol=rmi</property> G\h8j*o  
<property name=”port”>10900</property> 'T[=Uuj"  
</bean> FVLXq0<Cj  
FM9b0qE  
a AYO(;3
  
Standard JBM bisocket connector pfg"6P  
z2t;!]"'l  
Change port 4457 to an available port. i2b\` 805  
)Y~q6D K  
For Example: S}e*~^1J  
XRs/gUT  
<!– Standard JBM bisocket connector –> ,)V*xpp  
<bean class=”org.jboss.services.binding.ServiceBindingMetadata”> tZ>>aiI3  
<property name=”serviceName”>jboss.messaging:service=Connector,transport=bisocket</property> ;~z>GJox  
<property name=”port”>4458</property> U._ U!U  
</bean> 5`oor86  
t,N-|  
V]H<:UE  
JBossTS Recovery Manager Tv3ZNh  
KGi@H
%NN  
Change port 4712 to an available port. K *vNv4  
X_s;j5ur  
For Example: O,qR$#l   
!dhZs?/UI  
<!– JBossTS Recovery Manager –> y(.WK8  
<bean class=”org.jboss.services.binding.ServiceBindingMetadata”> pY=?r{@  
<property name=”serviceName”>TransactionManager</property> 9][Mw[k>  
<property name=”bindingName”>recoveryManager</property> y#AY+ >  
<property name=”port”>4715</property> Si]Z`_  
</bean> >;xEzc!W3*  
Cy6[p  
m_r Re\  
JBossTS Transaction Status Manager m OmT ]X  
gK)B3dH*&  
Change port 4713 to an available port. 5tq$SF42X  
73}k[e7e  
For Example: )STt3.  
;SC|VcbyH  
<!– JBossTS Transaction Status Manager –> K&|zWpb  
<bean class=”org.jboss.services.binding.ServiceBindingMetadata”> pNiqb+^nz  
<property name=”serviceName”>TransactionManager</property> )1x333.[c  
<property name=”bindingName”>transactionStatusManager</property> KAsS= `  
<property name=”port”>4714</property> y Fp1@*ef  
</bean>
T}!7LNE  
;4qalxzu  
:cynZab  
Save all changes and close the bindings.xml file. sL/Lw WH  
P{> T?-Hj  
Y(A?ib~K  
sg6cq_\  
Locate the server.xml file to be changed. xq~=T:>/A  
Q o=  
NOTE: Changing either server is acceptable. ]iNSa{G  
R,^FJ  
Default file location for Contract Management: <Install Drive>\jboss-5.0.1.GA\server\cm\deploy\jbossweb.sar\server.xml rW6w1  
Default file location for P6 v7 Web Access: <Install Drive>\jboss-5.0.1.GA\server\primaveraweb\deploy\jbossweb.sar\server.xml ]B7t9l  
V&}Z# 9Dx  
3<`h/`ku  
l{pF^?K  
Change the port number in the following location: dl;A'/(t  

(f.A5~e  
A AJP 1.3 Connector on port 8009 1bDc ct  
;;`KkNysm  
Change port 8009 to an available port. 2 rBF<z7  
bQeYFY#^  
Example: 3
4l=U?  
1%:A9%O)t  
<!– A AJP 1.3 Connector on port 8019 –> V('b|gsEo  
<Connector protocol=”AJP/1.3″ port=”8019” address=”${jboss.bind.address}” J *B`C^i  
redirectPort=”8443″ /> @6tx5D?  
D"WkD j"M  
>L(F{c:  
Save the change and close the server.xml file, close Notepad. \ lKQ'_  
lGz0K5P{  
Etc amI*`  
NR [VGZj  
Restart both the Contract Management and the P6 Web Services. ;K_B,@:'  
lt]U?VZ   
NOTE: The order in which the services are started are irrelevant.

十分感谢!